1 * 100M FX + 4 * 10 / 100M TX Poe Powered Network Switch , Fast
Ethernet Switch
Introduction
The OFS-PE-SF1T4switches 4-port Unmanaged Ethernet switches
supporting PoE (Power-over-Ethernet) on port 1-4. The switches are
classified as power source equipment (PSE), and when used in this
way, the OFS-PE-SF1T4 switches enable centralization of the power
supply and provide up to 15.4 /30 watts of power per port. The
switches can be used to power IEEE 802.3af/at compliant powered
devices (PD), eliminating the need for additional wiring, and
support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex,
MDI/MDI-X auto-sensing to provide an economical solution for your
industrial Ethernet network.
Features and Benefits
Ø Comply to IEE 802.3 10Base-T,IEEE802.3u ,100Base-TX/FX
Ø Provide a SC single-mode /multimode optical port and 10/100M RJ45
port, support for Full/half duplex mode and auto MDI/MDI-X
connection
Ø Comply to IEEE 802.3af/at , provide power for the IP cameras over
Ethernet
Ø Dynamic LED indicator, display the current operating status,
providing a simple working condition and troubleshooting tips
Ø Adopt IEEE 802.3x Standard full-duplex flow control ,with
standard duplex Backpressure flow control.
Port Configuration
Ø RJ45 Port: Auto-negotiation, 10/100Base-T, Full/Half Duplex,
Auto-MDI/MDIX, on copper cable of cat5# with operation distance of
less than 100 meters.
Ø 100Base-FX Optical Port: LC/SC/FC/ST/LC optical port
Ø Single-mode:20, 40, 60, 80, 100,120Km,optional
Ø Multi-mode: 2, 5Km,optional
Ø Wavelength: 850nm, 1310 nm, 1550nm
Power Input options
Ø Input Voltage: 48V DC (46~57VDC) ,Redundant power input
Ø Overload Current Protection
Environmental Limits
Ø -40℃ ~+ 50℃( Wide Temperature)
Ø Storage Temperature:-40℃ ～+ 70℃
Ø Humidity: 5%～95%
Mechanical Dimension
Ø Dimensions:115x91x26mm
Ø Weight: 560g
Warranty
Ø 1 years
